banda radioamatoriale (patentati) > Icom

New firmware IC-7300 vers. 1,40

(1/2) > >>

vesuvio21:
Nuovo firmware 1.40

plotino:
ad integrazione
https://www.icomjapan.com/support/firmware_driver/3248/


--- Citazione ---Changes from Version 1.30
[Spectrum scope is improved]
- A Scroll mode that can seamlessly change the displaying scope range, depending on the operating frequency, is added.
- A popup screen that displays when SPAN or EDGE change is added.
- The number of FIX EDGE memories is expanded to 4.
- Each band independently memorizes the Reference level.
- Improved the Scope function of the RS-BA1.


[Preset function is added for FT8 operation]
- A Preset function that can set each operation is added.


[Multi-function dial is enhanced]
- A Multi-function dial now works as a memory channel selector in the Memory mode.
- A Multi-function Menus Customization function is added.
- A function indicator for the Multi-function dial is added.


[Other changes]
- A Front Key Customization function that can change the function of [VOX/BK-IN], [AUTOTUNE], [△], and [▽] is added.
- A MIC Key Customization function that can change the function of [UP] and [DOWN] is added.
- The Band Stacking Register window is added.
- While operating in the Data mode, the receive tone control is deactivated.
- The default setting of the CI-V USB Port is changed to “Unlink from [REMOTE].”

Refer to INFORMATION IC-7300 Version 1.40 for details.

The Scroll mode for the RS-BA1 Version 2 software will be added to Version 2.30.
--- Termina citazione ---

'73
Luca

pesciolino73:
Fatto.grazie della new. 73

vesuvio21:

--- Citazione da: plotino - 27 Febbraio 2021, 15:37:27 ---ad integrazione
https://www.icomjapan.com/support/firmware_driver/3248/

'73
Luca

--- Termina citazione ---


--- Citazione da: plotino - 27 Febbraio 2021, 15:37:27 ---ad integrazione
https://www.icomjapan.com/support/firmware_driver/3248/

'73
Luca

--- Termina citazione ---
Faccio prima la premessa: io possiedo "Yaesu".
Dopo la dovuta premessa, dico che ICOM è molto seria e correttà quando rilascia un firmware, perchè spiega passo passo cosa va a migliorare/modificare.
Invece, la maggior delle volte, Yaesu scrive:  Improved and optimized additional functions.

ik2nbu Arnaldo:
Softare cinese yaesu ha da fare ancora molta strada per raggiungere i livelli di Icom e Kenwood

Navigazione

[0] Indice dei post

[#] Pagina successiva

Vai alla versione completa