colt 444

Aperto da 211070, 18 Novembre 2008, 18:46:54

Discussione precedente - Discussione successiva

0 Utenti e 1 Visitatore stanno visualizzando questa discussione.

Zamo84

Ciao Cimabue! Grazie dell'info....quindi, questo riguarda solo l'mky, dunque....meglio così  :up:


LuckyLuciano®

Esatto, il grande CIMA mi ha anticipato.
Non si può descrivere la passione, la si può solo vivere®
La stanchezza passa, le ferite guariscono, la gloria...è eterna©
Homines, dum docent, discunt™

Zamo84

Ragazzi, 73 a tutti voi....Ho dato un'occhiata sommaria al mio colt 444. Mi pare identico al washington.....cmq, ho alcune domandine. Il c99 è da rimuovere e poi ponticellare? Poi, sembra una domanda stupidissima...ma non sono riuscito a far funzionare il preascolto! Ho notato che c'è una resistenza di grosso wattaggio collegata ad un pin della presa ext, e termina nello stampato....aiuti?
Grazie mille :D

echo

hello
how to perform on radio talkback colt 444? please help


LuckyLuciano®

Citazione di: echo il 10 Giugno 2012, 08:56:38
hello
how to perform on radio talkback colt 444? please help


Like Alan 48.
You must link the negative of speaker to ground.
Non si può descrivere la passione, la si può solo vivere®
La stanchezza passa, le ferite guariscono, la gloria...è eterna©
Homines, dum docent, discunt™

echo

works thank you
one question
how to mount the power control knob on the radio colt 444?
Is this possible?
This modification may be unnecessary?


LuckyLuciano®

Citazione di: echo il 10 Giugno 2012, 13:08:18
works thank you
one question
how to mount the power control knob on the radio colt 444?
Is this possible?
This modification may be unnecessary?

The colt 444 has 3 power levels.
Non si può descrivere la passione, la si può solo vivere®
La stanchezza passa, le ferite guariscono, la gloria...è eterna©
Homines, dum docent, discunt™


echo

I know that has 3 levels of power but I was thinking about the regulation of fluid
ok thanks for the reply LuckyLuciano
anything can be improved in the radio? except remove C99

marcolino

Citazione di: echo il 10 Giugno 2012, 22:12:53
I know that has 3 levels of power but I was thinking about the regulation of fluid
ok thanks for the reply LuckyLuciano
anything can be improved in the radio? except remove C99

Hello
You want to make a continuous adjustable power?


echo

I want to smooth adjustment by potentiometer
a 3 position switch used for other purposes

LuckyLuciano®

Citazione di: echo il 10 Giugno 2012, 23:13:07
I want to smooth adjustment by potentiometer
a 3 position switch used for other purposes


Of coarse...
You can use this method of power regulation, but you must use the bdx53 like Alan48 or Midland 4001.
Non si può descrivere la passione, la si può solo vivere®
La stanchezza passa, le ferite guariscono, la gloria...è eterna©
Homines, dum docent, discunt™

marcolino

Citazione di: echo il 10 Giugno 2012, 23:13:07
I want to smooth adjustment by potentiometer
a 3 position switch used for other purposes

Ok, the power regulation continues to be done with the transistor bdx53, as mentioned by Lucky Luciano.
I attach the schematic of colt 444, to help you make the variable power.

echo

whether the original three-stage power shortcut which is on the radio 444 has the same effect as I mounted the shortcut by the potentiometer?


LuckyLuciano®

Citazione di: echo il 11 Giugno 2012, 17:25:17
whether the original three-stage power shortcut which is on the radio 444 has the same effect as I mounted the shortcut by the potentiometer?


With the potentiometer, you have a possibility to adjust the power in continuity mode.
Otherwise, you can use the originale 3 steps regulation. In my opinion there is a good reason to use the continuos regulation.
Non si può descrivere la passione, la si può solo vivere®
La stanchezza passa, le ferite guariscono, la gloria...è eterna©
Homines, dum docent, discunt™

echo


I understand
I did adjust potenciometrem runs beautifully :-D
I will add that I did like in midland 4001 but did not want to work and I had different
Thank you for your interest in my questions




LuckyLuciano®

Citazione di: echo il 23 Giugno 2012, 14:19:31

I understand
I did adjust potenciometrem runs beautifully :-D
I will add that I did like in midland 4001 but did not want to work and I had different
Thank you for your interest in my questions


you should use another method like what I wrote in the last post.
Non si può descrivere la passione, la si può solo vivere®
La stanchezza passa, le ferite guariscono, la gloria...è eterna©
Homines, dum docent, discunt™